tag:blogger.com,1999:blog-4533703094188189176.post6942214003281919109..comments2024-03-24T08:57:27.283-06:00Comments on Chasing Net Zero: Bloody wind.Shafraazhttp://www.blogger.com/profile/12680723864772294621noreply@blogger.comBlogger2125tag:blogger.com,1999:blog-4533703094188189176.post-28402583229349423992011-05-16T15:03:26.972-06:002011-05-16T15:03:26.972-06:00Over here at "the Tyvek house" I've ...Over here at "the Tyvek house" I've had some of it flapping in the wind as well. One thing that works quite well is to screw scraps of 2x4 or plywood at the corners and along edges to hold the Tyvek firn against the sheathing. Much less chance of it coming loose that way.Philip Meesnoreply@blogger.comtag:blogger.com,1999:blog-4533703094188189176.post-29975644718260078132011-05-16T09:31:42.332-06:002011-05-16T09:31:42.332-06:00Hi Shafraaz.
Tough luck. We also had high winds a...Hi Shafraaz. <br />Tough luck. We also had high winds a couple of weeks ago. <br />I agree with your observation about either delaying the installation of the air barrier, or installing the siding soon after the barrier has been installed. On one of our jobs, we delayed installing the air barrier for a couple of days. Without the air barrier, the wind pressure drove the insulation out of the wall cavities. However, without the barrier, wind driven rain can infiltrate via the cracks between sheathing. (The Z strips you installed might prevent this problem.) <br />Another factor to consider if the barrier is exposed for several months - the sun UV deteriorates the air barrier over time. <br />I agree with your contractor. It is very unsafe to erect tall ladders in the wind, especially in an open location like yours. With the air barrier flapping like a loose sail, a worker could be flung from his perch very easily. It is not worth risking life and limb to save $100.00 of material. <br />Good luck. JimJim Merrithewnoreply@blogger.com